MOOG EPU (Electro‑Hydraulic Servo Pump Control Unit) is an electro‑hydrostatic integrated product. It integrates servo motor, four‑quadrant hydraulic pump, manifold valve block, miniature oil reservoir and sensing detection components into one single unit. It is the core component for distributed electro‑hydraulic drive. It eliminates traditional large centralized hydraulic power stations and complicated piping. The servo motor speed directly controls pump displacement, pressure and flow direction. Closed‑loop force, speed and position control can be realized without independent servo valves. Three product lines are available: compact small‑displacement EPU‑G series, standard medium‑to‑large‑displacement EPU series, and complete EAS integrated actuation system. Manufactured at original MOOG factory in USA, they are widely applied for component fatigue test benches, precision forming equipment, wind‑turbine pitch control and airborne aerospace actuators.
Other product models from the same brand are available. Please contact sales staff for quotation.
High integration & space‑saving: Integrated packaging of motor, pump, oil tank and manifold block. Direct flange mounting to hydraulic cylinder without intermediate tubing and valve assemblies. Equipment footprint reduced by over 40%, enabling independent single‑axis distributed drive.
Four‑quadrant full‑closed‑loop control: The pump operates in forward/reverse four‑quadrant modes. Pressure build‑up, unloading and direction change are realized by servo speed regulation, eliminating proportional servo valves. Low oil consumption; system response ≤5 ms; force control accuracy up to ±0.5% FS.
Energy‑saving, low‑noise & low loss: On‑demand variable‑flow oil supply with automatic speed reduction under no‑load. 35%‑55% power‑saving compared with conventional power units. Full‑load noise ≤68 dB. Built‑in multi‑stage precision filtration, stable oil cleanliness NAS7‑NAS8, extending service life of seals and pump cartridge.
Dual‑cooling optional: Air‑cooled as standard; water‑cooled version optional. Continuous 24‑hour non‑stop operation under high‑temperature condition (≤60℃). Mean Time Between Failures(MTBF)>22 000 hours.
Intelligent bus communication: Matched with MOOG MSD servo drives, supporting high‑speed EtherCAT and CANopen buses. Compatible with MSC motion controllers. One‑click parameter tuning via host computer. Built‑in self‑diagnosis & alarm for oil temperature, oil pressure and leakage faults.
Description: New‑generation internal gear pump design for low‑flow low‑pressure precision working conditions. Displacement 5‑20 cc, maximum system pressure 345 bar, flow rate 20‑85 L/min. Used for small shock absorber testing, precision fixture clamping and small‑size servo hydraulic cylinder applications.
Common models:EPU‑G5, EPU‑G8, EPU‑G13, EPU‑G20
Description: Radial piston pump architecture, displacements:19 cc /32 cc /80 cc, pressure 280‑315 bar. Balanced response speed and output thrust. Standard power units for automotive component test benches and medium‑small fatigue loading equipment.
Common models:EPU‑19, EPU‑32, EPU‑80(air‑cooled / water‑cooled options)
Description: Large variable‑displacement piston pump, main displacements 140 cc,250 cc. Peak working pressure 350 bar, high‑flow output. Suitable for large‑structure fatigue testing, hydraulic forming presses and wind‑turbine main‑shaft loading tests.
Common models:EPU‑140, EPU‑250(natural cooling / water‑cooled optional)
Description: Factory‑assembled complete set including EPU power unit, manifold block and original servo hydraulic cylinder. Three mounting configurations:inline, parallel and right‑angle. Pre‑calibrated and pre‑wired at factory, plug‑and‑play without extra hydraulic accessories.
Common models:EAS‑L19(inline 19 cc), EAS‑P32(parallel 32 cc), EAS‑R80(right‑angle 80 cc)
Units are standard‑equipped with MOOG MSD‑series servo drives. Optional integrated drive‑servo‑motors and MSC‑series motion controllers. Complete original control system with perfectly‑matched hardware‑software parameters, no third‑party component tuning required.
Automotive Testing: Shock‑absorber durability testers, multi‑channel suspension loading benches, seat bump‑simulation equipment.
Aerospace: Environmental vibration tests for airborne accessories, small control‑surface loading actuators, landing‑gear component impact testing.
Heavy‑Duty Equipment: Precision hydraulic forming presses, die‑casting machine mold‑locking units, wind‑turbine blade pitch‑driving.
General Automation: Special fixture clamping mechanisms, small multi‑degree‑of‑freedom swing test platforms.
Two supply grades: fully original US‑built units and European‑assembled units. Besides standard‑displacement models, non‑standard customization is available according to pressure, flow and installation‑dimension requirements.
Other product models from the same brand are available. Please contact sales staff for quotation.