There are other products and models of the same brand. Please contact sales personnel for quotations.
Founded in Germany in 1980, Beckhoff is the pioneer of PC‑based open automation. Its core technologies are the EtherCAT real‑time Ethernet and TwinCAT 3 software platform. All hardware adopts a fully‑modular design with native EtherCAT bus support, realizing integrated control of PLC, motion control, machine vision, functional safety, IoT and AI.
The complete hardware system consists of six core segments:
Unified with the TwinCAT 3 software, it supports IEC 61131‑3 standard programming, multi‑axis synchronization, flying‑shear / electronic cam, machine learning and OPC UA IoT. It is widely applied in machine‑tools, lithium‑battery, packaging, semiconductor, chemical explosion‑proof, logistics and other industries.
CX‑series are compact DIN‑rail‑mounted industrial PCs. EL EtherCAT terminals can be plugged directly on the right side without extra couplers, combining PC computing power and PLC real‑time control. Two hardware platforms are available: ARM cost‑optimized and X86 high‑performance.
General advantages of CX‑series ‑ Standard DIN35 rail mounting; EL terminals can be directly back‑plugged without EK coupler; ‑ Minimum real‑time task cycle: 50 μs, microsecond‑level multi‑axis synchronization; ‑ Operating temperature: ‑25℃ ~ +55℃; CE, UL, GL marine certifications.
EL terminals are Beckhoff’s most‑commonly‑used modular I/O with 12 mm slim width and high‑speed E‑bus backplane interconnection. Up to 65535 terminals can be cascaded behind one EK coupler. Hot‑swap and per‑channel independent fault diagnosis are supported.
‑ EK1100 standard EtherCAT coupler: RJ45 Ethernet, converts EtherCAT slave to local E‑bus backplane, the most widely‑used basic model; ‑ EK1128 integrated‑I/O coupler: Built‑in 4DI/8DO, eliminating separate I/O terminals for small‑size equipment; ‑ EK9xxx multi‑protocol gateway couplers: EK9320 (PROFINET), EK9020 (Modbus TCP), EK9520 (EtherNet/IP), enabling third‑party PLCs to connect to EtherCAT I/O; ‑ EK9160 IoT coupler: Embedded OPC UA / MQTT for direct cloud IoT connection.
‑ EL1004: 4‑channel 24 VDC digital input; EL1008: 8‑channel high‑density DI; EL1018: 16‑channel DI ‑ EL2004: 4‑channel 0.5 A transistor output; EL2008: 8‑channel DO; EL2088: 16‑channel DO
All channels are equipped with built‑in short‑circuit, reverse‑polarity and wire‑break diagnosis. Per‑channel fault codes can be read by user programs.
‑ EL3064: 4‑channel 4‑20 mA / 0‑10 V analogue input, 16‑bit high resolution; ‑ EL4004: 4‑channel analogue output for closed‑loop control of proportional valves and frequency converters; ‑ EL3314: 4‑channel PT100 RTD; EL3331: K/J/S‑type thermocouple for temperature measurement of ovens and extruders; ‑ EL3453 power‑measurement terminal: collects voltage, current, power and harmonics for energy monitoring; ‑ EL336x weighing terminals: high‑precision strain‑gauge acquisition for constant‑tension control in coating and slitting processes.
‑ EL5101 high‑speed counter: incremental encoder, spindle speed measurement, flying‑shear positioning; ‑ EL5001 SSI absolute‑encoder terminal; ‑ EL6224 IO‑Link master: 4‑channel IO‑Link for connection of smart sensors and valve islands; ‑ EL6001 RS485/RS232 serial port; EL6652 CANopen; EL6631 PROFIBUS; ‑ EL9110 power‑supply terminal; EL9011 terminating resistor; EL9505 redundant‑power‑supply terminal.
All‑in‑one terminals with integrated intrinsic‑safety isolators. No external safety barriers required. ATEX / IECEx certified. Direct connection to explosion‑proof transmitters and valves to save cabinet space. ‑ Models: ELX1004 intrinsically‑safe DI, ELX3064 intrinsically‑safe analogue input.
Yellow‑coded safety series with dual‑channel redundant DI/DO. Collects emergency‑stop, safety light‑curtain and safety‑gate signals, outputs servo STO safety cut‑off circuits, complying with Machinery Directive 2006/42/EC. ‑ Representative models: EL1904 safety input, EL2904 safety output.
IP67 protection grade, M12 push‑pull self‑locking connectors. Can be mounted directly on machine‑tools, robots and profile rails without local control cabinets. Signals are acquired close to field side, greatly reducing cable length and electromagnetic interference.
EP1xxx Digital mixed DIO EP1124 (8DI/8DO), EP1114 (16‑point configurable DI/DO), for 24 VDC solenoid valves, photoelectric sensors and limit switches. Dual D‑coded M12 Ethernet ports support daisy‑chain networking.
EP3xxx Analogue acquisition modules EP3174 4AI 4‑20 mA voltage‑current for remote acquisition of pressure and tension transmitters.
EP6xxx IO‑Link master boxes EP6224 4‑channel IO‑Link for distributed connection of smart sensors, RFID readers and proportional valves.
EP7xxx compact low‑voltage drive modules (48 V servo / stepper integrated units) EP7211 48 V servo drive box, EP7041 stepper motor drive. Miniature drives are mounted directly on‑machine, eliminating cabinet‑based servo modules.
Core advantages of EP‑series ‑ IP67 dust‑proof and water‑proof, resistant to cutting fluid, water mist, dust and high‑pressure washing; ‑ M12 Push‑Pull tool‑free plug‑and‑unplug for fast maintenance; ‑ Built‑in switch for multi‑unit cascading; one bus cable covers all stations of the whole production line.
Core motion‑control drives from Beckhoff with native EtherCAT bus. Common DC‑bus architecture enables multi‑axis energy exchange and energy‑saving via braking energy regeneration. TwinSAFE STO/SS1 safe‑torque‑off is standard.
‑ Single‑axis modules: AX8108 (8A), AX8118 (18A), AX8128 (28A); ‑ Dual‑axis integrated modules: AX8206 2×6A to reduce cabinet footprint; ‑ Integrated power‑supply + axis modules: AX8525 / AX8540 with combined rectifier and inverter for simplified wiring; ‑ Compatible with AM8000 servo motors, OCT multi‑feedback encoders, electronic cam, flying‑shear and colour‑mark tracking functions.
Compact single / dual‑axis drives with built‑in 24 V control power supply, single‑phase 220 V power input. Cost‑effective for packaging, injection‑moulding and small machine‑tools.
‑ ELM7222 slim terminal‑mount servo, plugged directly onto EL I/O backplane for low‑power positioning axes, no separate drive cabinet required.
Innovative plug‑and‑play modular solution replacing traditional complete electrical cabinets. Power supply, PLC, I/O, servo drives and safety modules are all standardized plug‑in units on base backplanes. Overall volume reduced by 35 %. It can be integrated directly onto machine bodies, suitable for stand‑alone automation, robots and packaging machinery.
The complete set includes MX backplane, MX‑CX embedded controller, MX‑EL I/O, MX‑AX servo drives, MX power‑supply and MX safety modules. Factory pre‑wired for fast on‑site plug‑in assembly.
World‑leading EtherCAT real‑time bus 100 Mbps hardware synchronization, minimum cycle 50 μs, synchronization jitter <1 μs. Lag‑free multi‑axis flying‑shear and high‑speed interpolation. Supports MRP ring redundancy, IRT real‑time and OPC UA IoT.
Unified TwinCAT 3 software platform for all hardware One software environment for PLC programming, motion tuning, vision processing, safety logic and data logging. Programs can be ported seamlessly across different hardware to lower development costs.
Flexible modular combination & scalable expansion DI, AI, counter, drive and safety terminals can be freely combined after EK coupler. Adding or removing I/O points does not require backplane replacement. EP distributed modules allow local expansion without main‑cable modification.
Per‑channel independent diagnosis & protection Each I/O channel supports independent short‑circuit, wire‑break and over‑current detection. Faults are pinpointed to single channels without full‑station shutdown. Drives feature multi‑level protection against over‑current, over‑voltage, over‑temperature and encoder wire‑break.
Complete safety compliance system TwinSAFE SIL2/PLd safety I/O and servo STO safe‑torque‑off, meeting safety acceptance requirements for machine‑tools and packaging machines. ELX explosion‑proof series holds ATEX certification for chemical hazardous zones.
Wide‑temperature & multi‑industry certifications ‑ Standard modules: ‑25℃ ~ +55℃; XC extended‑temperature models: ‑40℃ ~ +70℃; ‑ Certifications include CE, UL, GL marine, ATEX explosion‑proof and FDA food‑industry standards.
Precision CNC machine‑tools & 5‑axis machining equipment CX high‑performance industrial PC + AX8000 servo + EL high‑speed counter terminals for high‑precision contour interpolation and multi‑axis synchronization; TwinSAFE safety circuits with servo STO.
Lithium‑battery & PV new‑energy production lines EP IP67 distributed I/O, EL high‑precision analogue I/O and IO‑Link modules for distributed acquisition of temperature‑humidity, tension and vacuum signals in coating, winding and inspection stations.
Packaging, printing & logistics‑sorting equipment CX8200 cost‑optimized controller + EL standard I/O for high‑speed synchronization of flying‑shear, follow‑shear and colour‑mark tracking; MX‑System cabinet‑free solution simplifies stand‑alone‑machine mechanical design.
Semiconductor & 3C clean‑room equipment Oil‑free clean‑grade EP distributed I/O and ELM compact servo drives for wafer and PCB handling in dust‑free workshops without particle contamination.
Chemical & pharmaceutical explosion‑proof production lines ELX intrinsically‑safe explosion‑proof terminals and TwinSAFE safety modules for remote acquisition of transmitter and explosion‑proof‑valve signals in Zone 1 hazardous areas.
Robots & automated stand‑alone machines EP7xxx on‑machine servo drives and EP distributed I/O mounted close to robot forearms for minimal wiring.
Plant‑wide central IoT & smart‑factory EK9160 IoT coupler + CX multi‑core industrial PC for equipment data acquisition, MES interconnection and remote maintenance.