Additional products and models are available under this brand. Please contact our sales staff for quotations.
G&M TECH is a South‑Korean professional original manufacturer of miniature oil‑free piston air pumps, specializing in wobble‑piston (Wob‑L) oil‑free combo pumps. The dual‑head parallel RND series is an integrated pressure / vacuum dual‑function unit. One single pump delivers negative vacuum suction and positive compressed air simultaneously, eliminating the need for separate vacuum pump and air compressor, and greatly saving equipment installation footprint.
The unit features die‑cast aluminum pump housing, full stainless‑steel valve reeds and permanently lubricated bearings for completely oil‑free operation, delivering clean oil‑free air. A high‑performance built‑in muffler comes as standard for low vibration and low noise. Widely applied in medical, oxygen‑concentrator, semiconductor, environmental monitoring, packaging and beauty instrument precision equipment. CE safety certified. Multiple AC & DC voltage options available for stable 24‑hour continuous operation.
Two wobble‑piston pump heads with parallel air‑circuit layout. Under parallel mode total flow is superimposed while vacuum level and discharge pressure remain at single‑head specifications. For higher vacuum performance, the same platform supports series connection (RND series‑connected variant). Flow decreases while vacuum level improves. Two air‑circuit configurations for different working conditions.
Eccentric shaft drives reciprocating wobble pistons. Piston rings are made of wear‑resistant self‑lubricating composite material. No lubricating oil required inside cylinder, preventing oil contamination of air source. Bearings are pre‑greased for permanent lubrication, no oil refilling required throughout service life.
Independent vacuum suction port and positive‑pressure discharge port on pump body. Vacuum picking and air‑blow purging can run simultaneously to complete vacuum and compression processes in parallel.
One unit supplies both vacuum negative pressure and compressed air. Removes requirement for two separate pump assemblies and dual power‑control circuits. Preferred solution for compact automation and medical instrument integration.
Oil‑free design delivers air free of oil mist. Meets high‑purity gas requirements for food, medical, semiconductor and laboratory applications, avoiding contamination to workpieces and reagents.
Symmetric dual‑head layout counteracts operating vibration. Integrated muffler chamber as standard, operating noise ≤ 62 dB(A). Optional rubber anti‑vibration feet eliminate equipment resonance.
Die‑cast aluminum housing with anti‑oxidation surface treatment. Light weight and excellent heat dissipation, resisting overheating during long continuous operation. Stainless‑steel check‑valve reeds tolerate moisture and mildly corrosive gases.
AC capacitor‑start motor integrates thermal fuse for automatic power‑off under overload or overheat conditions to prevent motor burnout. DC brushless versions support speed regulation and extended service life.
Piston rings, valve reeds and muffler can be replaced individually without full‑pump replacement. Modular pump‑head disassembly‑assembly takes only around 5 minutes.
Dual‑head parallel (parallel flow‑boosted type) core models: 80RND, 100RND, 120RND, 140RND
80RND (General‑Purpose for Compact Equipment) ‑ Free‑air flow: 80 L/min ‑ Ultimate vacuum: ‑720 mmHg (‑96 kPa) ‑ Max discharge pressure: 3.5 bar ‑ Typical applications: dental equipment, compact beauty devices, laboratory gas sampling
100RND (Market mainstream standard model) ‑ Free‑air flow: 100 L/min ‑ Ultimate vacuum: ‑740 mmHg ‑ Max discharge pressure: 3.8 bar ‑ Typical applications: oxygen concentrators, ozone generators, small packaging machines, chip mounting
120RND (Medium‑Flow industrial OEM) ‑ Free‑air flow: 120 L/min ‑ Ultimate vacuum: ‑750 mmHg ‑ Max discharge pressure: 4.0 bar ‑ Typical applications: online environmental monitoring instruments, food‑processing suction, compact automation production lines
140RND (High‑Flow heavy‑duty model) ‑ Free‑air flow: 140 L/min ‑ Ultimate vacuum: ‑755 mmHg ‑ Max discharge pressure: 4.2 bar ‑ Typical applications: semiconductor vacuum handling, continuous packaging equipment, medical negative‑pressure suction systems
General Electrical Specifications ‑ AC power: 100/110 V, 220/230 V, 50/60 Hz, 2‑pole / 4‑pole capacitor‑start motor ‑ DC power: 12 V / 24 V brushless motor (custom for portable instruments) ‑ Ambient operating temperature: 0 ℃ ~ 40 ℃; process gas temperature: 5 ℃ ~ 60 ℃ ‑ Protection class: IP44 ‑ Unit weight: 1.8 ~ 2.6 kg, compact installation footprint
Dual pump‑heads connected in parallel for high flow output. Vacuum and pressure stay at base‑level performance. Suitable for high pumping‑speed and high blow‑air‑flow scenarios: packaging suction, production‑line purging.
Dual pump‑heads connected in series. Flow is halved while vacuum degree rises significantly. Suitable for high‑vacuum low‑volume extraction and gas‑analyzer negative‑pressure sampling.
Dental suction, oxygen‑concentrator air supply, skin‑beauty instruments, negative‑pressure physiotherapy equipment, laboratory biochemical analyzers. Oil‑free air meets medical cleanliness requirements.
Vacuum suction for chip mounters, PCB handling and component inspection stations. Oil‑free operation avoids contamination of precision electronic parts.
CEMS flue‑gas sampling pumps, supporting air supply for ozone generators, gas delivery for online water‑quality analyzers. Tolerates trace acidic moisture.
Small‑scale vacuum sealing, material suction & transfer, packaging separation by air‑blow. Clean air source without contact‑risk for food raw materials.
Vacuum gripping on compact production lines, workpiece air‑blow dedusting, vacuum holding for small molds.
Standard 220 V AC versions of 100RND and 120RND are normally available as original stock. High‑flow 140RND, DC brushless speed‑regulated variants and PTFE corrosion‑resistant custom pump‑heads are built‑to‑order from South‑Korea factory.
Original consumable spare parts: piston rings, stainless‑steel valve reeds, muffler cotton, anti‑vibration feet, pressure regulators and vacuum gauges can be purchased separately for replacement.
Additional products and models are available under this brand. Please contact our sales staff for quotations.