Founded in Everett, Washington, USA in 1948, Fluke is a global benchmark brand for portable industrial test instruments. It specializes in the R&D and manufacturing of on‑site electrical, thermal, mechanical, process‑calibration and power‑quality metrology equipment. Following the acquisition of Raytek infrared‑temperature‑measurement product lines, its portfolio covers full‑scenario applications including electrical maintenance, automation instrument calibration, mechanical‑fault diagnosis, new‑energy industries and metrology laboratories.
Core product highlights: military‑grade three‑proof ruggedness, true‑RMS measurement, complete CAT safety protection, Fluke Connect wireless data connectivity and traceable metrological accuracy across the full product line. Most handheld models come with lifetime warranty. Products hold complete certifications including IEC, CAT III/CAT IV high‑voltage safety, explosion‑proof and CMC metrology qualifications. They are widely deployed in power grids, factory automation, photovoltaic and energy‑storage new‑energy sectors, HVAC & building management, chemical & petrochemical industries, medical sectors, third‑party metrology laboratories and rail‑transport industries. A comprehensive local after‑sales and calibration service network is available in China.
‑ General‑purpose AC/DC Clamp Meters (376 FC, 381) Flexible large‑diameter coils. Capable of measuring inverter harmonics and inrush starting current. Wireless data synchronization with multimeters for distribution cabinet and motor‑load testing. ‑ PV High‑voltage DC Clamp Meter (393 FC) 1500 V DC safety rating for DC current and power measurement of PV arrays. ‑ Milliamps‑range Process Clamp Meter (771) Measures only 4‑20 mA instrument‑loop signals without disconnecting signal wires. For fault diagnosis of transmitter and control‑valve loops. ‑ Earth‑resistance Clamp Meter (1630‑2) No ground‑rod installation required. Measures earth resistance of transmission towers and equipment enclosures via clamping. Applied for grounding inspection of power‑industry and explosion‑proof chemical equipment.
‑ Economical TiS Series (TiS20+ / TiS60+) For HVAC, building and basic electrical inspection. Basic temperature measurement and visualization of hot/cold defects. ‑ High‑end Industrial Models (Ti480 Pro / TiX650) High‑pixel thermal imagers compatible with telephoto lenses. Precision temperature measurement for high‑voltage substation equipment, boilers, motor bearings and lithium‑battery production lines. Temperature‑difference resolution ≤ 0.03 ℃. Supports thermal‑image storage and test‑report export.
Typical applications: overheating of distribution‑cabinet joints, motor‑bearing temperature rise, pipeline heat‑loss insulation defects, PV‑module hot‑spots, cold‑storage heat‑leakage and fire‑related electrical‑hazard investigation.
Representative model: 190‑204 III. 4‑channel isolated inputs with 1000 V CAT safety rating. Integrates oscilloscope, multimeter and data‑recorder functions. Automatically captures waveforms from inverters, servo drives, CAN‑bus and pulse signals. For on‑site fault diagnosis of machine tools, new‑energy electronic control units and automotive electronic systems. Unlike bench‑top oscilloscopes, it is portable and drop‑resistant for workshop‑floor operation.
‑ 725S / 754 Multi‑function Signal Calibrators Output 4‑20 mA, thermocouple, RTD, voltage and frequency signals. Calibrate temperature and pressure transmitters and control valves. Supports HART communication and automatic calibration‑record generation. ‑ 729 Pro Automatic Pressure Calibrator Built‑in motor‑driven pressure pump with automatic pressure control from 0 ~ 70 MPa. Works with 700G pressure modules for on‑site calibration of pressure gauges and transmitters. Standard equipment for thermal metrology in chemical plants and power stations. ‑ Dry‑block temperature furnaces and reference thermocouples For batch‑calibration of temperature sensors and measuring instruments in metrology laboratories.
Representative models: 1777, 1738. Collect full three‑phase parameters including voltage, current, power, power factor, 2‑30 kHz supra‑harmonics, voltage dips, surges and unbalance factors. Built‑in memory, automatically generates national‑standard power‑quality reports. Used for harmonic‑mitigation testing of factory power distribution, charging piles, PV inverters, UPS and variable‑frequency drives.
Representative models: 1537, 1550C, 1587 FC. Perform high‑voltage insulation tests at 500 V / 1000 V / 2500 V for transformers, cables, motor windings and PV‑module insulation‑withstand‑voltage testing. The 1587 FC combines multimeter and megohmmeter in one compact unit for convenient equipment‑maintenance work.
5522A / 5502A multi‑function reference sources for calibrating multimeters, clamp meters and power meters. Matched with pressure‑ and temperature‑reference devices for quantity‑value traceability in third‑party metrology institutes and enterprise metrology laboratories.
‑ Military‑grade three‑proof rugged design: Most handheld instruments withstand 3‑meter drops and feature IP54/IP67 water‑ and dust‑proof ratings. Tolerate workshop cutting fluids, dust and wide temperature ranges for stable long‑term operation under harsh conditions. ‑ Comprehensive high‑voltage safety protection: Graded safety certifications CAT III 1000 V / CAT IV 600 V. Arc‑ and surge‑protection for high‑voltage measurements to safeguard operator safety. ‑ True‑RMS measurement: Accurately captures distorted waveforms from inverters, UPS and non‑linear loads; average‑value‑type meters would produce substantial measurement errors on such signals. ‑ Fluke Connect wireless‑connectivity ecosystem: Thermal imagers, multimeters, power‑quality analyzers and calibrators support Bluetooth wireless communication. Mobile‑phone APP stores data, automatically generates inspection reports and archives equipment‑inspection logs in the cloud, complying with IATF16949 and power‑industry‑inspection‑ledger requirements. ‑ Traceable metrological accuracy for all scenarios: Each instrument is factory‑supplied with original calibration certificates and supports annual verification by domestic metrology institutions, recognized by metrology institutes and third‑party‑testing bodies. ‑ Extended service life & after‑sales support: Most handheld multimeters and clamp meters carry lifetime warranty. Global service sites enable local repair and calibration. ‑ Integrated multi‑function designs: Combined‑function units (thermal‑imaging multimeters, ScopeMeter multimeters, insulation multimeters) reduce tool‑carrying burden and improve on‑site maintenance efficiency.
Power Grid & Substation Maintenance Thermal imagers, power‑quality analyzers, high‑voltage megohmmeters and earth‑resistance clamp meters for safety inspection of busbar overheating, harmonics, cable insulation and transmission‑tower grounding.
Photovoltaic, Energy‑storage & Charging‑pile New‑energy Sector 1500 V high‑voltage multimeters, DC clamp meters, PV thermal imagers and charging‑pile power‑quality analyzers for detection of module hot‑spots, DC combiner boxes and OBC on‑board chargers.
Factory Automation, Chemical & Petrochemical Industries 725 process calibrators, vibration testers, acoustic‑imaging leak detectors and ScopeMeters for transmitter calibration, motor‑pump‑unit fault diagnosis, compressed‑air‑leak location and inverter‑waveform troubleshooting.
HVAC, Building & Construction TiS thermal imagers, temperature‑humidity meters and leakage‑current clamp meters for detection of pipeline heat‑loss, wall water seepage and distribution‑system hazards.
Automotive Manufacturing & Lithium‑battery Production Lines Hand‑held ScopeMeters, power‑quality analyzers and infrared thermal imagers for servo‑electronic‑control debugging, battery‑module temperature‑rise monitoring and production‑line harmonic mitigation.
Third‑party Metrology‑testing Laboratories 5522A calibration reference sources, dry‑block temperature furnaces and pressure‑reference modules for annual metrological verification of electrical and thermal instruments.
Rail‑transport & Wind‑power Industries Vibration testers, high‑voltage megohmmeters and power‑quality analyzers for fault monitoring of traction motors, wind‑turbine gearboxes and converters.
‑ Electrical‑test accessories: high‑voltage insulated test leads, flexible current coils, thermocouple temperature probes and earth‑test clamps. ‑ Thermal‑imaging accessories: telephoto / wide‑angle lenses, infrared‑calibration black‑body furnaces, battery chargers and rugged carrying cases. ‑ Process‑calibration accessories: 700G pressure modules, HART communicators and various pressure‑connection hoses. ‑ Mechanical‑testing accessories: vibration acceleration sensors, magnetic mounting bases and acoustic‑imaging extension poles. ‑ Software accessories: Fluke Connect mobile APP, calibration‑record‑management software and power‑quality‑report export tools. ‑ Maintenance spare parts: original lithium batteries, fuses, protective rubber boots and calibration tooling fixtures.
Standard Fluke multimeters, clamp meters and entry‑level thermal imagers are in sufficient stock. High‑end TiX‑series thermal imagers, 810 vibration testers, 754 multi‑function calibrators, laboratory‑grade 5522A reference sources and explosion‑proof custom‑configured units can be ordered from the original US manufacturer with stable lead‑times.
Other products and models from this brand are available. Please contact sales personnel for quotations.