There are other products and models of the same brand. Please contact sales personnel for quotations.
The HD series is a classic three‑phase power DC screen charging module from Emerson Network Power. It is matched with intelligent DC operating power supply systems for battery charging and control‑bus closing power supply in substations, power plants, rail transit and industrial & mining distribution rooms.
The two models share identical hardware structure, enclosure, communication and protection logic. Only output voltage and rated current are different. Mixed installation within one DC screen cabinet is supported.
Core Circuit Architecture Adopts phase‑shift full‑bridge resonant soft‑switch high‑frequency conversion technology. Built‑in digital CPU for full‑digital control and three‑phase PFC power factor correction. Features high power factor, low harmonic distortion and high efficiency. Supports N+1 parallel redundancy for multiple modules and hot‑swap online maintenance.
Output voltage, current limit and on/off are fully commanded by the system monitoring unit. ‑ Automatically executes three‑stage battery charging logic: float charge, equalize charge, step‑down charge. ‑ Parallel current sharing for multi‑module N+1 redundant fault‑tolerant operation. ‑ Remote voltage adjustment, remote on/off, fault reporting to background host.
Independent of the monitor. Output voltage is adjusted locally via front‑panel potentiometer for standalone loaded operation. Operating parameters are still uploaded to the monitor. Suitable for single‑module maintenance and temporary power supply.
AC over‑voltage / under‑voltage, three‑phase phase loss, lightning surge suppression. Module stops for protection upon abnormality and auto‑restores when AC returns to normal.
‑ Hard‑latched output over‑voltage: Permanent shutdown when >293 V for HD220 series, >145 V for HD110 series. Power‑cycle reset is mandatory. ‑ Output under‑voltage alarm: Alarm indicator only; no shutdown. ‑ Output short‑circuit fold‑back: Short‑circuit current limited to 40 % rated current. Auto‑recovery after short‑circuit removal.
Power de‑rating upon heat‑sink overtemperature; full shutdown at extreme high temperature. Auto‑recovery after temperature drops.
Output current deviation <3 % among paralleled units. Failure of one single module will not interrupt system power supply.
‑ Bus: RS485, standard power‑industry DC‑screen communication protocol ‑ Tele‑measurement: Upload output voltage, output current, module temperature, AC input status ‑ Tele‑signal: Report fault, protection, running and shutdown status ‑ Tele‑control: Remote power‑on / power‑off ‑ Tele‑adjustment: Remote modification of float‑charge voltage, equalize‑charge voltage and current‑limit value
‑ Three‑phase soft‑switch technology plus high PFC: Low harmonic pollution; no extra filter required. Well‑suited for legacy substations and fluctuating power grids. ‑ Hot‑swap capability: Single‑module replacement without shutting down the whole DC screen; control power and battery power remain uninterrupted. ‑ Low‑noise intelligent cooling: Fan‑less silent operation under light load, friendly for equipment‑room environments. ‑ Battery‑friendly low ripple: Minimizes plate corrosion and extends service life of storage batteries. ‑ Digital CPU control: High regulation precision, stable current sharing and strong anti‑interference performance, ideal for unattended substations. ‑ Wide‑range‑temperature aluminum alloy housing: High heat dissipation, dust‑proof and corrosion‑resistant, reliable for 24‑hour continuous long‑term operation.
‑ Intelligent DC screens for 10 kV / 35 kV / 110 kV / 220 kV substations ‑ Operating power supplies for thermal power plants, hydropower plants, PV / wind‑farm booster stations ‑ DC power distribution systems for metro and rail transit traction power supply ‑ Uninterrupted operating power supplies for chemical, coal‑mine and metallurgical industrial‑mining distribution rooms ‑ Battery charging systems matched with UPS in data centers and large‑scale computer rooms
Standard original HD22010‑2 and HD11020‑2 modules are normally in stock. Bulk complete sets and customized high‑temperature wide‑temperature variants have a lead‑time of 5‑8 weeks.
Available supporting spare parts: communication cables, module cooling fans, internal power components, RS485 monitoring unit, DC‑screen insulation monitor and battery inspection instrument.