Founded in Hamburg, Germany in 1947, STULZ is a global benchmark brand for high‑end precision cooling, with over 70 years of R&D and manufacturing experience in data‑center thermal management. It has established a wholly‑owned subsidiary, STULZ Air‑Conditioning Technology (Shanghai), in China. Units are manufactured in compliance with stringent German industrial standards. Four core strengths include military‑grade continuous‑operation reliability, ultra‑high temperature‑humidity control accuracy, native FreeCooling across the full product range, and full‑front maintenance without unit disassembly. Control accuracy: Temperature ±0.3 ℃, Humidity ±2% RH, outperforming the general industry standard of ±0.5 ℃ / ±3% RH. The full series supports multiple cold‑source options: DX direct‑expansion air‑cooled, chilled‑water CW, glycol‑cooled and fluorine‑pump heat‑pipe hybrid systems. It covers micro edge computer rooms, small‑to‑medium‑sized IDCs, high‑density AI computing‑power computer rooms, hyperscale cloud data centers, laboratories, energy‑storage cabins and industrial constant‑temperature workshops. Equipped with self‑developed C7000 intelligent control system, it seamlessly interfaces with DCIM, building BA and SNMP environmental‑monitoring platforms.
Application Scenarios 5G base stations, bank branches, substation main‑control rooms, small UPS battery cabins, small precision‑instrument laboratories and micro edge computer rooms.
Core Configuration & Features Ultra‑narrow cabinet with footprint only 0.65 m × 0.65 m; multiple air‑supply modes: upflow / downflow / side‑blow. Standard EC infinitely‑variable‑speed fans, independent electric heater, infrared humidifier and deep dehumidification circuit. Optional Direct FreeCooling for direct‑expansion units; compressors can stop for energy saving in northern regions. Outdoor unit stable cooling from ‑20 ℃ to +50 ℃; no auxiliary heating required under low‑temperature conditions. C7000 intelligent controller with colour touch‑LCD screen; standard Modbus / SNMP communication. Full‑front maintenance; no side service‑aisle required for filters, humidifier trays and electrical controls.
Representative Models CyberAir DX air‑cooled, CyberAir CW chilled‑water, CyberAir GE glycol‑cooled hybrid units.
Core Hardware Advantages Original German Bitzer scroll compressors with N+1 modular redundancy design; the whole unit keeps running upon single‑compressor failure. Large‑area V‑shaped high‑sensible‑heat evaporator optimised for IT sensible‑heat loads, greatly cutting energy consumption for dehumidification‑reheat. Standard EC variable‑frequency fans; airflow adapts dynamically to computer‑room loads, reducing fan power consumption by 40 % under partial‑load conditions. Dual humidification options: electrode humidification (general‑purpose), stainless‑steel infrared humidification (for poor‑water‑quality regions; service interval extended by three times). Full Indirect FreeCooling; heat exchange utilises outdoor cold source in spring, autumn and winter, cutting annual compressor operating hours by 60 %. Intelligent multi‑unit group‑control with automatic load balancing. Faulty units are taken offline automatically while remaining units increase cooling capacity to guarantee computer‑room safety.
Key Technical Highlights Proximity cooling eliminates hot‑spots; short hot‑cold‑air circulation prevents air mixing. Supports high‑density GPU servers with 8‑30 kW per cabinet. Air‑cooled and chilled‑water versions available. Isolated independent water‑circuit compartment eliminates risk of IT‑equipment flooding caused by water leakage. Four independent modules for cooling / heating / humidification / dehumidification delivering complete constant‑temperature‑and‑humidity performance. Modular on‑demand expansion enables phased‑computer‑room construction and phased‑investment to lower initial capital expenditure. Compared with conventional room‑level air‑conditioners, annual PUE is reduced by 0.2‑0.3 with remarkable energy‑saving benefits.
Refrigeration Circuit Original German Bitzer variable‑frequency scroll compressors. EEV electronic expansion valve delivers precise dynamic refrigerant‑flow regulation. Internally‑threaded V‑shaped evaporator improves heat‑exchange efficiency by 30 %. R410A low‑GWP eco‑friendly refrigerant meets green data‑center standards.
Staged PID Electric Heating Multi‑stage stepless temperature regulation. Accurate temperature compensation after dehumidification prevents sharp temperature drop during dehumidification; coordinated joint temperature‑humidity regulation.
Dual Humidification Systems ‑ Electrode humidification: cost‑effective and easy‑to‑maintain. ‑ Infrared‑radiation humidification: stainless‑steel humidifier tray, compatible with ordinary tap‑water. Limescale is easy‑to‑clean, suitable for regions with poor‑quality tap‑water in China.
Independent Deep Dehumidification Logic Combined cooling‑based dehumidification and reheat‑compensation linkage control. Stably maintains computer‑room standard humidity range of 40‑55 % RH without mutual interference between temperature and humidity.
Air‑supply & Filtration System Standard EU4 pre‑filter; optional EU7 / EU11 medium‑to‑high‑efficiency filters. Three‑stage‑filtration design achieves 99.9 % PM2.5 removal efficiency, protecting coil cleanliness in heavy‑dust environments.
7‑inch colour touch‑screen for local real‑time display of temperature‑humidity, compressor, fan, humidification, energy‑consumption and fault‑code data. Full‑dimensional fault early warning: filter clogging, high‑/low‑pressure protection, humidification failure, fan overload and sensor‑wire breakage. Local audible‑visual alarms plus remote alert notifications via SMS / email. Multi‑protocol standard communication: Modbus RTU/TCP, SNMP and HTTP web backend. Seamless integration with third‑party DCIM and building BA systems. Multi‑unit group‑control management: one controller can link up to 99 units, supporting load balancing, automatic fault‑triggered switch‑over and sleep‑mode energy saving. Full‑cycle equipment self‑check: power‑on self‑test and cyclic runtime self‑check. Time‑stamped fault records are permanently stored for operation‑and‑maintenance traceability.
‑ Industry‑leading Temperature‑humidity Control Accuracy: ±0.3 ℃ temperature and ±2% RH humidity. The sole applicable brand for demanding scenarios such as pharmaceutical manufacturing, metrology and high‑end laboratories. ‑ Native FreeCooling across Full Product Range: Three FreeCooling solutions (direct‑expansion / indirect / fluorine‑pump heat‑pipe) are standard from compact Mini units to large chillers. Annual power saving reaches 70‑84 % in northern regions and drastically cuts computer‑room electricity expenditure. ‑ Military‑grade Continuous‑operation Reliability: 15‑year design service‑life. Key components support N+1 redundancy. Compressor vibration ≤0.1 mm/s. Multiple global core data‑centres have achieved 20‑year non‑stop operation without major overhaul. ‑ 100 % Full‑front‑maintenance Design: All consumable parts (filters, humidifier trays, electrical controls and compressors) are serviceable from the front. No side‑access‑aisle required, improving computer‑room space utilisation by 20 %. ‑ Wide‑range Environmental Adaptability: Outdoor units start at ‑20 ℃ and run stably at +50 ℃. Reliable performance in frigid Northeast China, scorching South China and dust‑prone Western China. ‑ Complete Integrated Cooling Ecosystem: Full coverage including small room‑level, high‑density row‑level, outdoor‑cabinet, chiller and custom‑built industrial AHU. Unified control system from single vendor eliminating third‑party‑interface compatibility risks.
‑ Digital Infrastructure: Large‑scale cloud IDCs, AI computing‑power computer rooms, 5G edge base stations, container‑type micro‑module data centers, operator switching computer rooms. ‑ Finance & Power: Bank core computer rooms, substation main‑control rooms, energy‑storage‑battery constant‑temperature cabins. ‑ Scientific Research & Healthcare: Metrology‑calibration laboratories, pharmaceutical clean‑workshops, hospital imaging computer rooms, bio‑information‑storage computer rooms. ‑ New‑energy Manufacturing: Lithium‑battery coating / winding clean‑workshops, energy‑storage‑converter control rooms. ‑ Industrial Precision Manufacturing: Semiconductor inspection rooms, precision‑machine‑tool control rooms, metrology‑oriented constant‑temperature workshops.
Cooling Accessories: Air‑cooled outdoor condensers, chilled‑water plate heat‑exchangers, fluorine‑pump FreeCooling modules, glycol dry‑coolers. O&M Consumables: Spare EU4 / EU7 / EU11 filters, infrared humidifier trays, electrode humidification assemblies, condensate drain pumps. Monitoring Accessories: C7000 touch‑display screen, SNMP communication gateway, remote‑fault‑alarm module, DCIM data‑acquisition software. Installation Kits: Unit vibration‑damping bases, upflow air‑supply ducts, raised‑floor downflow air‑supply plenum boxes, water‑circuit shock‑absorbing connectors.
CyberAir Mini small‑capacity 5‑35 kW units are available from local stock. Conventional air‑cooled CyberAir standard room‑level units have sufficient inventory. MicroSpace row‑level high‑density units, CyberCool chillers and custom‑built industrial AHUs are subject to original‑manufacturer production scheduling in Germany. Accurate type‑selection and quotation can be provided according to computer‑room area, cabinet heat density, cold‑source type (air‑cooled / chilled‑water / fluorine‑pump FreeCooling) and constant‑temperature‑and‑humidity accuracy requirements.