Additional products and models are available under this brand. Please contact our sales staff for quotations.
SERVAX belongs to Switzerland‑based LANDERT Group, founded in 1924, headquartered in Bülach near Zurich. It is one of Europe’s leading manufacturers of custom high‑power‑density servo motors, spindle direct‑drive motors and application‑specific drives, focusing on special drive solutions for demanding working conditions. All products are developed and manufactured in‑house in Switzerland. With nearly a century of experience serving machine‑tool, textile, plastics, rail‑transit and protective‑door automation industries.
Core positioning: high‑torque, high‑speed, liquid‑cooled high‑density modular custom servo systems. Matched with self‑developed SM‑series servo drives to realize integrated motor‑drive closed‑loop control. CE and TÜV safety certifications available; small‑batch non‑standard customisation is supported.
Key model: SMDA‑400 series (SMDA401 / 402 / 403 / 404 / 405)
Construction features Multi‑pole permanent‑magnet rotor with extremely low rotor losses and low temperature rise. Slender compact housing delivering far higher power density than standard servo motors. Full torque available at zero speed; field‑weakening speed expansion up to 1.5× rated speed, custom version achieves wide speed ratio up to 1:4.
Two cooling options: ‑ Air‑cooled version: standard IP54, equipped with cooling air ducts, for general‑purpose automation and textile machinery. ‑ Liquid‑cooled version (SMDA403): integrated water‑cooling jacket inside housing. Power output increased by 40 % at identical volume, suitable for 24‑hour continuous heavy‑duty and machine‑tool spindle applications.
Specification scope Outer diameter 60‑350 mm; short / long stack customisable; inner / outer rotor options; sealed impregnated windings. Compatible with single‑turn / multi‑turn encoders or resolver feedback for high‑precision positioning.
Advantages: excellent partial‑load energy efficiency, strong overload capacity, compact footprint. Delivers substantial energy savings as a replacement for hydraulic drives.
Exclusive SERVAX patented construction: asynchronous squirrel‑cage combined with embedded permanent‑magnet composite rotor. Combines asynchronous start‑up and steady‑state synchronous operation. ‑ Direct mains‑frequency start‑up available; also supports frequency‑converter‑based synchronous group control. ‑ Stable synchronous operation above 50 rpm; multiple motors can run synchronously off one shared drive unit. ‑ For textile godet rollers, film stretching, multi‑axis synchronous long production lines. Shaft temperature resistance up to 200 °C.
Integrated water‑cooled housing without external cooling fans. High‑rigidity monoblock spindle construction, zero gear backlash and vibration‑free machining. ‑ Speed range from several thousand up to tens of thousands rpm, high torque and superior dynamic balance. ‑ Directly embedded into lathe, grinder and machining‑centre spindle housings to reduce machine footprint. ‑ Special wear‑resistant shaft material, resistant to cutting fluid and heavy shop‑floor dust.
General‑purpose economical drives supporting dual‑mode operation with frequency converters or servo drives. Customisable windings, voltages and speeds. Applied to plastic extrusion, conveying and auxiliary feed mechanisms.
Representative models: SMDC‑200, SMDC‑400
Electrical specifications Input 230 VAC single‑phase 50/60 Hz, max power 190 W, rated output current 1.0 A. IP20 protection, cabinet‑mount installation.
Control functions Full three‑loop closed‑loop control: independent PID tuning for position / speed / torque. Supports incremental encoder and resolver feedback.
Interfaces Digital I/O, pulse‑direction command, analogue 0‑10 V / 4‑20 mA. Electronic‑gear multi‑axis synchronisation. Built‑in fault‑code self‑diagnosis (over‑current, over‑temperature, encoder loss, overload).
Compatible motors: small‑frame SMDA permanent‑magnet servos, textile godet‑roller motors, machine protective‑door drive motors.
Order‑No. Nr.410047. Modular plug‑in controller for medium‑to‑high‑power servo motors. Supports PLC field‑bus communication, multi‑axis positioning, electronic cam and flying‑shear synchronisation. For machine‑tool and printing automation equipment.
Complete integrated drive unit matched with special servo motors for machine‑tool safety doors and automatic machine sliding doors. Built‑in soft start‑stop, anti‑collision torque‑limiting and position‑locking logic. Complies with machinery‑safety standards for machine tools.
‑ Industry‑leading liquid‑cooled ultra‑high power density: integrated liquid‑cooled housing achieves far better heat dissipation than air cooling. Output power increased by 30‑45 % for identical volume. Ideal for compact machine integration and 24‑hour continuous heavy‑duty cycles. ‑ Full‑process modular customisation: motor outer diameter, torque, speed, cooling, feedback, shaft extension, flange and winding voltage can all be customised. Fast development available even for small‑batch non‑standard machinery. ‑ Wide dynamic performance, full torque at zero speed: permanent‑magnet synchronous motors deliver rated torque at zero rpm. Millisecond‑level acceleration / deceleration; instantaneous peak overload up to 3× rated torque, jitter‑free fast start‑stop. ‑ Long‑life maintenance‑free construction: low‑loss rotors and sealed insulated windings. Textile‑grade variants use long‑life oil‑mist lubrication for multi‑year maintenance‑free operation. High‑temperature, dust‑ and cutting‑fluid‑resistant bearings. ‑ Optimised motor‑drive matching: original drive algorithms are tuned for SERVAX motor magnetic circuits, delivering superior control accuracy, synchronisation and stability versus third‑party general‑purpose drives. ‑ Harsh‑environment capability: standard IP54; optional IP65 sealing. Liquid‑cooled units accept cooling media from ‑20 °C to +120 °C. Special high‑temperature shafts withstand shaft‑end temperatures up to 200 °C.
‑ Power range: 0.1 kW up to multi‑100 kW heavy‑duty spindle motors ‑ Cooling: air‑cooled / integrated water‑cooling jacket as standard options ‑ Speed range: PMSM 1:1000 ~ 1:4 (field‑weakening); hybrid‑asynchronous synchronous operation starting from 50 rpm ‑ Feedback: incremental encoder, single‑ / multi‑turn absolute encoder, resolver ‑ Protection: air‑cooled IP54; custom‑sealed liquid‑cooled IP65 ‑ Shaft variants: parallel key, involute spline, hollow shaft, custom‑flange output
‑ Power supply: single‑phase 230 VAC; three‑phase 380 V high‑power models optional ‑ Control modes: switchable torque / speed / position closed‑loop ‑ Command sources: pulse‑direction, analogue, field‑bus communication ‑ Protection functions: over‑current, over‑voltage, under‑voltage, over‑temperature, encoder fault, stall, overload limiting
‑ Precision machine tools: liquid‑cooled direct‑drive spindle motors + SM‑SS3 drives for high‑speed cutting on grinders, lathes and machining centres; high‑rigidity zero‑backlash machining. ‑ Textile & chemical‑fibre machinery: hybrid permanent‑magnet‑asynchronous godet‑roller motors for spinning and film‑stretching multi‑axis synchronisation, high‑temperature‑resistant shafts for year‑round continuous operation. ‑ Plastic extrusion & injection‑moulding: high‑power air‑ / liquid‑cooled servo main drives for precise screw‑torque control and energy savings. ‑ Industrial‑automation protective‑door systems: complete SMD2 drive packages for machine‑tool safety doors and automatic conveyor‑line protective doors with anti‑collision safety logic. ‑ Rail‑transit special‑purpose equipment: custom wide‑temperature servo drives for positioning of train auxiliary mechanisms and maintenance equipment. ‑ High‑precision printing & film‑processing: multi‑axis electronically‑synchronised servo systems for film wind‑unwind and accurate printing register control.
Standard small‑size SMDC‑200, SM‑SS3 drives and medium‑low‑power air‑cooled SMDA servos are available from stock. High‑power liquid‑cooled spindle motors, custom hybrid‑asynchronous motors and three‑phase high‑power drive modules are built‑to‑order in Switzerland with import lead‑time 8‑12 weeks.
Genuine spare‑parts: encoders, sealed bearings, water‑cooling fittings, drive power boards, PID control modules and motor‑winding repair kits are available for separate replacement.
Additional products and models are available under this brand. Please contact our sales staff for quotations.