There are other products and models of the same brand. Please contact our sales staff for quotations.
Mitsubishi Electric is a global leading manufacturer of IGBTs. It self‑develops the CSTBT™ (Carrier‑Stored Trench‑Gate Bipolar Transistor) IGBT chip, evolved to the 7th‑generation (mainstream NX series) and 8th‑generation (new‑generation LV100). Matched with RFC soft‑recovery diodes, it delivers industry‑leading conduction and switching‑loss performance.
Product portfolio covers discrete IGBT modules, integrated IPM intelligent power modules, automotive‑grade IGBTs, high‑voltage HVIGBTs, SiC hybrid / full‑SiC modules. Voltage range: 600 V‑4500 V; current range: 35 A‑1800 A. Widely used in industrial inverters, servo drives, new‑energy systems, rail transit, electric vehicles and UPS. Certifications: UL, IEC, AEC‑Q101 automotive qualification.
‑ Trench‑gate plus field‑stop structure. Carrier‑storage effect significantly reduces saturation voltage Vce(sat). ‑ RFC soft‑recovery diode with low reverse‑recovery spike and reduced EMC interference. ‑ 8th‑generation adds split‑gate and CPL deep buffer layer: switching loss reduced by 25 %, power density increased by 25 %. ‑ Maximum junction temperature Tj = 175 °C for strong high‑temperature operating capability.
Adopts 7th‑generation CSTBT chip with low‑inductance compact package, 36 % smaller volume than traditional STD packages. Topologies: 2‑in‑1, 6‑in‑1, CIB (rectifier + inverter + brake integrated). ‑ Voltage ratings: 650 V / 1200 V / 1700 V ‑ Current range: 35 A‑1000 A
Typical models ‑ CM75DX‑24T: 1200 V / 75 A, 2‑in‑1, for servo drives and small‑size frequency converters. ‑ CM200DX‑34T: 1700 V / 200 A, for PV and energy‑storage converters. ‑ CM400DX‑24T: 1200 V / 400 A, 6‑in‑1, for 3‑phase industrial inverters. ‑ CIB series CM100TX‑24T: built‑in rectifier, inverter and brake switch to simplify system circuits.
Applications: servo drives, air‑compressor inverters, PV inverters, UPS, lithium‑battery manufacturing equipment.
New low‑inductance 100 × 140 mm standard package with 8th‑generation IGBT chip. Max current up to 1800 A with extremely low stray inductance for high‑power high‑frequency power‑conversion equipment. ‑ Voltage ratings: 1200 V / 1700 V / 2000 V ‑ Current range: 800 A‑1800 A
Representative model: CM1800DW‑24ME (1200 V / 1800 A) ‑ Advantages: double‑sided cooling structure, improved thermal‑cycle lifetime, excellent current‑sharing for parallel operation. ‑ Applications: large‑scale central PV inverters, wind‑power converters, energy‑storage PCS, high‑power industrial drives.
Traditional 62 mm standard package with cost‑effective performance. Preferred for maintenance and replacement of legacy equipment. ‑ Voltage: 600 V‑2000 V; Current: 75 A‑600 A ‑ Typical models: CM100DY‑24H, CM200DY‑24H ‑ Applications: medium‑small frequency converters and legacy servo drives.
Voltage coverage: 1700 V / 3300 V / 4500 V. XB / HV100 high‑voltage packages with MCB metal‑cast baseplate for lower thermal resistance. Tolerates harsh outdoor and on‑board vibration conditions. ‑ Typical models: CM450DE‑90X (4500 V / 450 A), XB‑series 3300 V locomotive modules. ‑ Applications: metro / high‑speed‑train traction converters, medium‑high‑voltage inverters, SVG flexible DC transmission, mine hoists.
AEC‑Q101 automotive‑qualified. Wide temperature range ‑40 °C ~ 175 °C, high vibration resistance and long service life. Topologies: 2‑in‑1, 6‑in‑1. ‑ 1200 V, 75 A‑600 A ‑ Representative models: FM600DX‑24A, J‑series 6‑in‑1 main‑traction modules. ‑ Applications: motor controllers for passenger / commercial vehicles, on‑board OBC chargers, DC‑DC boost modules.
Integrates IGBT chips, gate‑drive ICs and multi‑level protection (short‑circuit, over‑temperature, under‑voltage). Minimal peripheral circuitry. Two families: compact DIPIPM / SLIMDIP and high‑capacity V1 series.
‑ SLIMDIP™ ultra‑thin IPM: 600 V, 15 A‑50 A. For air‑conditioners, variable‑speed water pumps and small servos. SiC hybrid / full‑SiC variants available, loss reduction 47 %‑79 %. ‑ V1 high‑capacity IPM: 600 V / 800 A, 1200 V / 450 A. For industrial inverters and small PV inverters.
‑ Advantages: no external drive board required. Automatic fault‑shut‑down for short‑circuit and over‑temperature, lowering system‑development effort.
Mitsubishi provides hybrid SiC (Si‑IGBT + SiC diode) and full‑SiC MOSFET modules with pin‑to‑pin package compatibility with NX / LV100. Switching loss reduced by 60 %‑85 %, ideal for high‑frequency and high‑power‑density equipment.
‑ Hybrid SiC modules: 1200 V, 100‑600 A, for PV, energy‑storage and servo upgrading. ‑ Unifull full‑SiC modules: 1200‑3300 V, for rail transit and high‑power energy‑storage converters.
‑ Advantages: no IGBT tail current, greatly reduced temperature rise under high‑frequency operation, smaller heat‑sink size.
‑ Low‑loss self‑developed CSTBT chip: Better Vce(sat) and switching‑loss performance than competing products at same current rating, reducing system heating and heat‑sink volume. ‑ Full‑topology coverage: 2‑in‑1 single‑leg, 6‑in‑1 3‑phase full‑bridge, CIB rectifier‑inverter‑brake and NPC three‑level modules for various converter topologies. ‑ Robust reliability design: RFC soft‑recovery diodes suppress EMI without extra snubber circuits. High‑thermal‑conductivity AlSiC / MCB composite baseplates for low thermal resistance and stable 24‑h full‑load operation. Ultrasonic wire‑bonding and multi‑layer soldering double thermal‑cycle lifetime. Built‑in NTC temperature sensor simplifies system over‑temperature protection. ‑ Wide voltage & power range: 600 V for home appliances / low‑power; 1200 V general industrial; 1700 V new‑energy; 3300 / 4500 V rail‑transit high‑voltage. ‑ Standardised compatible packages: NX / LV100, STD, HV and IPM packages are standardised. Same‑power different‑generation modules are pin‑compatible; PCB redesign is unnecessary for replacement. ‑ Complete protection system: IGBT modules work with external drivers for short‑circuit, over‑current, over‑voltage, under‑voltage and over‑temperature protection. IPM integrates protection IC for fast fault‑latching.
‑ Rated blocking voltage: 600 V / 1200 V / 1700 V / 3300 V / 4500 V ‑ Rated collector current Ic: 35 A ~ 1800 A ‑ Max operating junction temperature: Tj = 175 °C ‑ Isolation voltage: 4 kV AC isolation between baseplate and power circuit ‑ Recommended switching frequency ‑ STD / NX: 1 kHz‑8 kHz (industrial inverters, servos) ‑ LV100 / SiC: 5 kHz‑35 kHz (PV, high‑frequency energy‑storage) ‑ HV high‑voltage IGBT: 300 Hz‑2 kHz (locomotive traction) ‑ Cooling: air‑cooled as standard; water‑cooled options for high‑power models.
‑ Industrial automation: NX 6‑in‑1 IGBT, V1 high‑capacity IPM for servo drives, frequency converters, air compressors, injection‑moulding machines and machine‑tool spindle drives. ‑ PV & energy‑storage: LV100 8th‑generation IGBT, hybrid‑SiC modules for string inverters, central PV inverters and bidirectional energy‑storage PCS converters. ‑ Electric‑vehicle on‑board: J / JM automotive‑grade IGBT for motor controllers of passenger cars and heavy‑duty trucks, on‑board OBC chargers. ‑ Rail transit & heavy industry: HVIGBT 3300 V / 4500 V XB‑series for high‑speed‑train / metro traction converters and mine hoists. ‑ UPS: CM‑series 2‑in‑1 / 6‑in‑1 modules for high‑power data‑centre UPS and industrial backup power supplies. ‑ HVAC & household appliances: SLIMDIP / DIPIPM compact IPM for inverter air‑conditioners, heat pumps, water pumps and fans. ‑ Environmental‑protection & water‑treatment: STD standard IGBT for fan inverters, high‑voltage power supplies and ozone‑generator drives.
Standard NX‑series 7th‑generation IGBT and medium‑small IPM models are generally available from stock. LV100 8th‑generation high‑capacity modules, HV high‑voltage locomotive modules, automotive‑grade J‑series and full‑SiC modules are built‑to‑order in Japan.
Supporting accessories: dedicated IGBT driver boards, snubber capacitors, thermal grease, aluminium water‑cooled heat sinks and laminated busbars can be supplied.
Original spare‑parts: damaged modules can be repaired by chip / baseplate replacement. Datasheets, thermal‑simulation models and SPICE circuit models are available for system development.