Additional products and models are available under this brand. Please contact our sales staff for quotations.
Founded in 1988 in Vicenza, Italy, AXOR INDUSTRIES is an original European manufacturer of distributed integrated servo motors. It independently develops and produces motor mechanics, power drive boards and control algorithms. The company specialises in all‑in‑one servo motors (also known as integrated motors). Different from traditional split‑type servos, power drive, encoder, control unit and brake circuit are all integrated at the rear of the motor. Separate cabinet‑mount servo amplifiers and long power / feedback cables are eliminated.
Two core product lines: low‑voltage DC MACKTRON (MKTB) compact integrated servos and 220V AC FAST‑BACK industrial integrated servos. Suitable for automation, packaging, medical, robotics, textile and precision tooling applications. Products hold CE and EMC certifications. Supported field‑buses: CANopen, RS232 and Modbus. Protection ratings IP54 / IP65 optional. Configurable options include holding brake, multi‑turn absolute encoder and STO Safe‑Torque‑Off. Key strengths: greatly simplified wiring, cabinet‑space saving, strong anti‑interference performance and distributed control capability.
A die‑cast drive housing is integrated into the motor rear end, housing a sine‑wave brushless servo drive unit. Motor stator, rotor, encoder, drive board and brake circuit are highly compacted: ‑ Single hybrid cable solution: One composite cable carries power supply, field‑bus communication, limit I/O and brake signals. Traditional split servos require two heavy‑duty cables, cutting wiring costs by 60 %. ‑ Eliminate long‑cable interference: Distance between drive and encoder is less than 10 cm, avoiding signal attenuation and electromagnetic disturbance caused by long cables, delivering higher low‑speed positioning accuracy. ‑ Integrated closed‑loop thermal management: Heat generated by motor operation cools the drive board simultaneously, keeping temperature rise under control during 24‑hour full‑load continuous operation. ‑ Modular detachable drive module: Snap‑in drive board allows replacement without disassembling the motor stator for easy maintenance.
‑ Significant cabinet‑space reduction: No separate servo amplifier required. Multi‑axis machines remove numerous drive mounting positions; compact equipment may eliminate the electrical cabinet entirely, reducing overall machine dimensions by 30‑50 %. ‑ Simplified wiring & fewer failure points: One composite cable replaces shielded power and encoder cables, reducing connectors, shielding and routing‑related faults and shortening commissioning time. ‑ Full servo functions built‑in: Three‑loop closed‑loop control (position / speed / torque), electronic cam, flying shear, tension control, multi‑axis synchronisation and auto‑tuning together with high‑ / low‑frequency vibration suppression are embedded; no additional controller expansion modules needed. ‑ Rich field‑bus and safety functions: CANopen and RS232 debug port as standard. Optional STO Safe‑Torque‑Off, hardware positive / negative limit switches, home switch and 2‑channel passive relay outputs. Real‑time mode switching among position, speed and torque modes is supported. ‑ Wide mechanical customisation: Flange size, plain / keyed shaft, key / spline, 24 V electromagnetic holding brake, food‑grade anodised housing, IP67 sealing and water‑cooling can be customised for OEM non‑standard equipment. ‑ Long service life: 8‑pole slot‑less permanent‑magnet rotor for jitter‑free low‑speed running. Original PTFE long‑life lubricated bearings deliver 30 000 maintenance‑free operating hours under standard conditions. Class B insulation (130 °C) with built‑in winding over‑temperature switch. ‑ Wide‑voltage dual‑product coverage: Low‑voltage DC 24 / 48 V for mobile equipment and compact tooling; 220 V single‑ / three‑phase AC for large production lines and heavy‑duty machinery.
DC24‑48 V power supply, compact distributed drive. Preferred for on‑machine installation, robot joints and medical devices.
Torque & power range: Continuous torque 0.15‑1.2 Nm, power 50‑400 W, max speed 6000 rpm. Core configurations: ‑ Feedback: 13‑bit single‑turn / multi‑turn absolute encoder; no homing required on power‑up. ‑ Communication: CANopen, RS232 for PC commissioning. ‑ I/O: Built‑in limit, home, servo‑ready and position‑complete digital signals. ‑ Options: 24 V electromagnetic holding brake, IP65 waterproof connectors, food‑grade housing.
Main models: MKTB42, MKTB60, MKTB80 (numbers stand for flange dimension 42 / 60 / 80 mm). Typical applications: Compact inspection tooling, medical imaging equipment, collaborative‑robot joints, small conveyor modules and laboratory precision instruments.
Single‑ / three‑phase 220 V AC power supply, medium‑to‑high‑power industrial integrated servo. Used for packaging, printing, textile and machine‑tool auxiliary axes.
Torque & power range: Continuous torque 1.1‑7.5 Nm, power 550‑3500 W, rated speed 2200 / 3000 rpm. Built‑in drive hardware: Integrated EMC filter, regenerative‑brake circuit, internal brake resistor, multi‑level protection against over‑current, over‑voltage, over‑temperature and encoder loss. Communication & control: CANopen daisy‑chain multi‑axis connection, RS232 PC debugging. Supports multi‑axis synchronisation, electronic cam, mark‑following and flying‑shear functions. Protection & mechanics: Standard IP54; IP65 dust‑water resistance optional. Standard keyed shaft; hollow shaft and custom flange available. 24 V power‑off brake supported.
Main models: FBK60, FBK80, FBK100, FBK130 high‑torque heavy‑duty variants. Typical applications: Bag‑making packaging machines, die‑cutting printing equipment, textile texturing machines, machine‑tool tool changers / indexing tables and logistics sorting conveyor lines.
‑ PC commissioning software: Dedicated AXOR software supporting one‑click mechanical identification, auto‑gain tuning, waveform capture, fault‑log export and parameter backup / restore. ‑ Handheld operator panel (optional): On‑site parameter modification for position, speed and torque without PC; manual jog‑and‑test functions. ‑ PLC compatibility: Connects to mainstream PLC brands (Siemens, Schneider, Inovance, Beckhoff) via CANopen. Pulse and 0‑10 V analogue interfaces enable retrofit of legacy equipment.
‑ Electrical protection: Over‑current, over‑voltage, under‑voltage, regenerative overload and drive‑board over‑temperature. ‑ Motor protection: Winding over‑temperature PTC alarm, encoder loss, overspeed and stall overload. ‑ Functional safety: Optional STO Safe‑Torque‑Off complying with EU Machinery Directive 2006/42/EC. ‑ Mechanical limit: Hardware positive / negative limit inputs for automatic collision‑stop equipment protection.
‑ Power supply: MKTB low‑voltage: DC24 / 48 V; FAST‑BACK AC: single‑ / three‑phase 220 VAC ‑ Torque range: 0.15 Nm micro‑size up to 7.5 Nm industrial heavy‑duty ‑ Encoder: 13‑bit single‑turn, multi‑turn absolute encoder; battery‑free position memory on power‑loss ‑ Protection class: Standard IP54; IP65, IP67 dust‑water resistance optional ‑ Insulation class: Class B 130 °C; high‑temperature custom Class H 180 °C ‑ Cooling: Natural air‑cooled as standard; forced‑air‑cooled and water‑cooled options for high‑power versions ‑ Cable interface: Single composite hybrid cable integrating power, bus, brake and limit signals
‑ Packaging & printing: FAST‑BACK AC integrated servos for bag‑making, die‑cutting and mark‑following synchronisation. Eliminates large numbers of cabinet‑mount drives for compact machine layout. ‑ Medical precision equipment: MKTB low‑voltage DC integrated motors for imaging devices and surgical‑assist mechanisms, low‑noise and clean operation without oil contamination. ‑ Small robots / collaborative manipulators: MKTB compact integrated servos for multi‑joint distributed drive, simplified wiring and lightweight structure. ‑ Textile & chemical‑fibre machinery: FAST‑BACK series for multi‑axis synchronisation and stable tension control on texturing and weaving machines. ‑ Machine‑tool auxiliary mechanisms: Tool changers, 4‑th indexing axes and automatic safety doors. Integrated servos reduce cabinet wiring workload. ‑ Laboratory & inspection equipment: MKTB42 compact integrated servos for micro‑displacement stages and precision inspection tooling.
Small‑size MKTB42 / 60 low‑voltage integrated servos have limited stock availability. FBK100 / 130 high‑torque AC integrated servos, IP67 waterproof and brake‑equipped custom variants are built‑to‑order in Italy with import lead‑time of 5‑9 weeks.
Genuine spare‑parts: drive power modules, multi‑turn encoders, electromagnetic brake assemblies, composite connection cables, shaft seals and cooling components can be purchased separately for replacement.