Carrier magnetic‑levitation compressors adopt core oil‑free refrigeration technology originating from the USA. Three product categories are available: standalone bare magnetic‑levitation compressors, 19PV integrated water‑cooled magnetic‑levitation chillers, and 19MV units with optional magnetic‑levitation configuration. Built with active electromagnetic levitation bearings plus permanent‑magnet direct‑drive two‑stage centrifugal structure. Mainstream compatible low‑GWP eco‑friendly refrigerants: R134a, R513A, R1234ze. Single‑unit cooling capacity ranges from 350 kW to 2500 kW. Two supply options: fully‑imported units from the United States and domestically factory‑assembled units. All models hold AHRI certification and meet China Class‑1 energy‑efficiency standards. The complete lubrication‑oil circuit is eliminated, delivering ultra‑low maintenance and high energy efficiency. Widely applied in IDC data centers, star‑rated hotels, hospitals, commercial complexes, industrial process chilled‑water, and energy‑saving retrofits for legacy plant‑rooms.
For other product models of the same brand, please contact sales personnel for quotations.
Friction‑free levitation operation: Full active electromagnetic bearings for both axial and radial directions. The rotor levitates without mechanical contact or wear. Oil‑circuit components including oil pump, oil separator, oil filter and crankcase heater are completely removed, eliminating failures such as liquid slugging, oil degradation and oil‑circuit blockage.
Built‑in integrated variable‑speed drive: Factory‑integrated Greenspeed variable‑speed module. Soft‑start inrush current is only 2 A, greatly reducing grid impact. Stepless capacity modulation from 10 % to 100 %. Built‑in full‑condition anti‑surge algorithm enables stable operation under variable water‑temperature conditions.
Safe landing protection upon power failure: During unexpected power loss, the high‑speed rotor generates reverse power to supply magnetic bearings for a short period. The main shaft lands smoothly onto backup mechanical protection bearings without collision damage. Near‑instant restart after power restoration, meeting non‑stop cooling requirements for data centers.
Refrigerant‑immersed permanent‑magnet motor: The hermetic motor is cooled by immersion in refrigerant, providing dust‑proof and moisture‑proof performance. Multi‑point winding temperature‑sensor protection. Operating noise ≤73 dB. Heavy‑duty vibration‑isolation bases are not required, and no additional acoustic treatment is needed for plant‑rooms.
Two‑stage balanced impeller structure: Back‑to‑back symmetrical impellers automatically counteract axial thrust with minimal operational vibration. Combined with electronic expansion valve and built‑in economizer, ultra‑high efficiency is maintained across wide water‑temperature ranges, with maximum IPLV up to 11.3.
19PV Standard Magnetic‑Levitation Unit: Equipped with high‑efficiency flooded heat‑exchange tube bundles. Standard evaporator outlet water temperature:3.3 ℃. Optional low‑temperature glycol water outlet. SmartView intelligent touch‑screen control, native BACnet & CCN building‑automation‑system integration, remote IoT monitoring and full‑parameter fault logging.
19MV Optional Magnetic‑Levitation Unit: New‑generation two‑stage high‑efficiency unit, available with magnetic‑levitation or conventional oil‑bearing configurations. Compatible with multiple low‑carbon refrigerants. Compact footprint ideal for confined‑plant‑room retrofits. Lower water‑side pressure drop, allowing reuse of existing circulating‑water pump piping.
PV035, PV070, PV120, PV200, PV350. Cooling capacity:350 kW‑1230 kW. Can be assembled with customer‑supplied condensers and evaporators for condensing units, for cooling‑plant retrofits and non‑standard process‑cooling applications.
19PV120 (422 kW/120 RT), 19PV220 (772 kW/220 RT), 19PV320 (1120 kW/320 RT), 19PV350 (1231 kW/350 RT). Standard units for small‑to‑medium data centers and office buildings.
19MV300, 19MV550, 19MV800, 19MV1000. Cooling capacity:1055 kW‑2460 kW. For large‑scale commercial complexes and industrial‑park centralized cold‑source projects. R513A low‑GWP eco‑friendly refrigerant is optional.
Precision cooling for internet IDC data centers, central air‑conditioning systems for Grade‑A tertiary hospitals, cooling‑heating systems for high‑end hotels, cooling plants for large‑shopping‑mall complexes, low‑temperature process chilled‑water for pharmaceutical / electronics plants, energy‑saving replacement retrofits for legacy screw / centrifugal chillers, green‑building projects, cold sources matched with ice‑storage systems.
Customization available on request: low‑temperature water outlet (glycol condition down to‑5 ℃), 6 kV high‑voltage motors, non‑standard total‑heat‑recovery tri‑generation units. Refrigerant specifications and piping flange dimensions can be customized according to site operating conditions. For other product models of the same brand, please contact sales personnel for quotations.