Founded in Munich, Germany in 1933, Rohde & Schwarz (R&S) is a global leader in RF and microwave test‑and‑measurement. It is an independent German family‑owned enterprise with full‑value‑chain R&D and manufacturing based in Germany. It vertically develops RF chips, signal‑generator and receiver core circuits in‑house, accumulating nearly 90 years of RF technology expertise.
Its product portfolio covers RF/microwave, wireless communications, automotive electronics, EMC electromagnetic compatibility, oscilloscopes, DC power supplies, power analysis, radar/satellite, broadcast‑TV, military‑electronics and cybersecurity. The frequency range spans from 2 Hz up to 1.1 THz millimeter‑wave / terahertz bands, fully supporting 5G/6G, Wi‑Fi 7, automotive radar, satellite communications and semiconductor‑chip testing. Its instruments deliver industry‑benchmark performance in phase noise, dynamic range and spectral sensitivity.
Products comply with 3GPP, CISPR, ISO, automotive IATF16949 and military‑aerospace standards. They are widely adopted by communication‑equipment manufacturers, automotive Tier 1 suppliers, semiconductor laboratories, third‑party metrology and EMC laboratories, aerospace‑defense institutions and broadcast‑TV operators. Service sites are present in over 70 countries worldwide. Technical centers and calibration laboratories are located in Shanghai, Shenzhen and Beijing in China.
R&S is the developer of the world’s first commercial vector network analyzer. Maximum frequency reaches 1.1 THz, with multi‑port systems up to 48 ports, used for S‑parameter testing of filters, antennas, RF chips and high‑speed cables.
‑ High‑end laboratory ZNA / ZNB Series Frequency range: 9 kHz ~ 43.5 / 67 / 110 GHz. Ultra‑low intrinsic noise floor and ultra‑high dynamic range. Designed for R&D of semiconductor RF chips and millimeter‑wave radars. Supports time‑domain impedance and TDR high‑speed cable testing.
‑ General‑purpose bench‑top ZVL / ZVT Series Cost‑effective multi‑port solutions for mass‑production testing of 5G RF modules and Wi‑Fi/Bluetooth modules, standard equipment for automated production lines.
‑ Millimeter‑wave / terahertz extension modules Working with external frequency extenders to cover 200 GHz ~ 1.1 THz for cutting‑edge R&D of 6G, satellite communications and millimeter‑wave imaging.
‑ Supporting software: ZNrun for automated testing, ZNXSIM for S‑parameter simulation and analysis. Compatible with PLC and LabVIEW for production‑line integration.
Applications: RF filters, power dividers, antennas, automotive‑radar RF front‑ends, impedance verification for high‑speed USB / Ethernet cables.
Applications: 5G base stations, mobile terminals, Bluetooth/Wi‑Fi modules, radar‑signal analysis, electromagnetic‑interference pre‑testing and radio‑spectrum monitoring.
Simulates various standard wireless, radar and satellite complex‑modulated signals. Forms a complete communication‑test system when paired with signal analyzers.
‑ SMW200A Flagship Dual‑channel Vector Signal Generator Two independent RF channels. Simulates MIMO multi‑antenna channels, 5G FR1/FR2 millimeter‑wave signals, 77 GHz automotive‑radar echoes and multi‑constellation GNSS satellite‑navigation simulation. Built‑in fading‑channel simulator.
‑ SMBV100B General‑purpose Single‑channel Signal Generator Mainstream model for mass‑production testing, covering general wireless standards below 20 GHz with moderate cost.
‑ RF noise sources & pulse signal generators Simulates radar pulses, interference noise and broadband jamming signals. For military‑electronics and anti‑interference testing.
R&S MXO / RTM / RTB full‑series digital oscilloscopes for R&D debugging, EMI near‑field investigation and bus decoding.
‑ MXO 5 High‑end Mixed‑signal Oscilloscope World’s first 8‑channel high‑resolution model with 10‑bit ADC. Built‑in FFT joint time‑frequency analysis. Supports decoding of high‑speed buses: CAN/LIN/Ethernet/USB. Works with near‑field probes to rapidly locate EMI interference sources.
‑ RTM3000 Mid‑range General‑purpose Oscilloscope 4‑channel, bandwidth 200 MHz ~ 1 GHz. For debugging embedded systems, power supplies and automotive‑electronic circuits.
‑ RTB2000 Entry‑level Model For education and small‑production‑line maintenance. 10.1‑inch touch‑screen display, basic time‑domain measurement and serial‑bus decoding.
Accessories: HZ‑17 near‑field‑probe set, differential high‑voltage probes and current probes for PCB interference pre‑evaluation.
‑ AREG 77 GHz Automotive‑radar Test Platform Simulates road targets, multi‑vehicle clutter and rain‑fog interference. Complete validation solution for autonomous‑driving millimeter‑wave‑radar chips and sensors, widely adopted by global automobile manufacturers.
‑ Automotive‑Ethernet Test Systems 100/1000BASE‑T1 bus conformance, EMC and signal‑integrity testing for automotive central‑control units and autonomous‑driving domain controllers.
‑ Vehicle‑level EMC anechoic‑chamber systems Fully compliant with CISPR 25 for radiated‑ and conducted‑interference testing of automotive electronics. Standard equipment for component‑and‑vehicle compliance‑certification laboratories.
Includes ESU EMI receivers, fully‑anechoic chambers, antenna towers, high‑voltage pulse generators, ESD (electrostatic‑discharge) simulators, EFT (electrical‑fast‑transient) generators and surge‑lightning generators. One‑stop solution for pre‑compliance and certification EMC testing for civil, automotive and military products.
‑ Small‑ / large‑size OTA chambers: Over‑the‑air radiated‑performance testing for mobile phones, routers and base‑station antennas; measures TRP radiated power and TIS receiver sensitivity. ‑ RF power amplifiers: 100 kHz ~ 40 GHz coverage for EMC radiated‑immunity testing, high‑power radar‑signal amplification and component burn‑in testing.
‑ Broadcast‑TV signal analyzers: Signal‑quality monitoring and stream analysis for digital‑TV and IPTV. ‑ Radio‑monitoring receivers: Government spectrum governance, drone‑jamming detection and illegal‑signal localization. ‑ Electronic‑warfare simulation systems: Complex‑electromagnetic‑environment simulation for anti‑interference testing of radar and communication equipment.
‑ Vertically integrated in‑house RF core development: RF chips, oscillators, mixers and ADCs are all self‑designed. Industry‑leading phase noise, noise‑floor and dynamic‑range performance with extremely low thermal drift over long‑term operation. ‑ Ultra‑wide frequency coverage: Continuous coverage from DC 2 Hz up to 1.1 THz terahertz band, satisfying cutting‑edge R&D requirements for communications, radar and millimeter‑wave technologies in one‑stop fashion. ‑ Unified standardized software ecosystem: R&S InstrumentView, WinIQSIM2 signal‑simulation software. Full‑line instruments support unified SCPI / LAN / USB / GPIB communication. Automated production‑lines can be readily built, supporting secondary development via Python / LabVIEW. ‑ Modular upgrade‑enabled architecture: Instrument hardware is modular. Bandwidth, frequency and demodulation standards can be upgraded later via software or hardware without replacing the whole unit, lowering long‑term procurement costs. ‑ Built‑in complete industry‑compliance certifications: Pre‑loaded full sets of standard test templates for 5G NR, Wi‑Fi 7, CISPR EMC, automotive radar and automotive Ethernet. One‑click recall of compliance test workflows. ‑ Industrial‑grade 7×24‑hour stable operation: Military‑grade circuit design supporting continuous non‑stop operation from ‑10 ℃ to +55 ℃. No measurement drift for automated production‑line testing and long‑term laboratory reliability tests. ‑ Full‑process local calibration services: Official calibration laboratories are available domestically. Annual metrology, fault repair and hardware upgrades can be completed locally to shorten lead‑times.
5G/6G Wireless‑communications Industry FSW spectrum analyzers, SMW vector signal generators and ZNA vector network analyzers for R&D and outgoing‑conformance testing of base stations, mobile handsets, RF chips and Wi‑Fi 7 modules.
New‑energy Vehicles & Autonomous Driving AREG radar‑test systems, automotive‑Ethernet testers, HMC power analyzers and complete EMC equipment. For compliance certification of OBC on‑board chargers, millimeter‑wave radars and vehicle‑level electromagnetic compatibility.
Semiconductor & Chip‑R&D Laboratories SMU source‑measure units and millimeter‑wave VNAs. Precision measurement of IV curves and RF parameters for RF SoCs, power devices and micro‑sensors.
Third‑party EMC / Metrology‑testing Laboratories ESU EMI receivers and standard EMC anechoic‑chamber systems for compliance‑certification testing of household appliances, industrial‑control and communication products.
Aerospace & Military‑electronics Terahertz‑extension instruments, electronic‑warfare simulation systems and GNSS satellite‑navigation simulators for testing radar, missile and airborne‑communication equipment.
Education & University Laboratories FPC entry‑level spectrum analyzers, RTB oscilloscopes and NGM DC power supplies for teaching experiments in RF and electronic‑information disciplines.
Broadcast‑TV & Radio‑spectrum Regulation Broadcast‑TV analyzers and wide‑band radio‑monitoring receivers for operator signal monitoring and spectrum‑management law‑enforcement.
‑ RF accessories: RF cables, calibration kits, attenuators, NRP‑series power sensors, near‑field / far‑field test antennas. ‑ Oscilloscope accessories: Differential probes, high‑voltage probes, current clamps and EMI near‑field‑probe sets. ‑ Automation accessories: OSP RF switch matrices, test fixtures and rack‑mount kits. ‑ Software accessories: WinIQSIM2 signal simulation, ZNrun automated testing and instrument‑control host‑computer software. ‑ Maintenance spare parts: Original calibration kits, input fuses, cooling fans and RF sealing connectors.
Standard R&S oscilloscopes, DC power supplies and entry‑level spectrum analyzers are in sufficient stock. High‑end vector network analyzers, FSW flagship spectrum analyzers, complete radar / EMC test systems and customized millimeter‑wave / terahertz equipment can be ordered from the original German manufacturer with stable lead‑times.
Other products and models of this brand are available. Please contact sales personnel for quotations.