French HYDRO LEDUC TXV series load sensing variable displacement piston pump
  • French HYDRO LEDUC TXV series load sensing variable displacement piston pump,MY SHOP,French HYDRO LEDUC TXV series load sensing variable displacement piston pump
  • French HYDRO LEDUC TXV series load sensing variable displacement piston pump,MY SHOP,French HYDRO LEDUC TXV series load sensing variable displacement piston pump
  • French HYDRO LEDUC TXV series load sensing variable displacement piston pump,MY SHOP,French HYDRO LEDUC TXV series load sensing variable displacement piston pump
  • French HYDRO LEDUC TXV series load sensing variable displacement piston pump,MY SHOP,French HYDRO LEDUC TXV series load sensing variable displacement piston pump

French HYDRO LEDUC TXV series load sensing variable displacement piston pump

Download
View all downloads
  • French HYDRO LEDUC TXV series load sensing variable displacement piston pump,MY SHOP,French HYDRO LEDUC TXV series load sensing variable displacement piston pump
  • French HYDRO LEDUC TXV series load sensing variable displacement piston pump,MY SHOP,French HYDRO LEDUC TXV series load sensing variable displacement piston pump

Description

France HYDRO LEDUC|TXV‑Series Load‑Sensing Variable‑Displacement Piston Pump Complete Specification

Additional products and models are available under this brand. Please contact our sales staff for quotations.

1. Brand & Product Overview

HYDRO LEDUC is an original French manufacturer specialized in R&D and manufacturing of on‑board mobile hydraulic components. The TXV series is a swash‑plate variable‑displacement piston pump purpose‑built for truck and mobile machinery PTO power‑take‑off applications, delivering compact on‑board hydraulic power units, fully manufactured in France.

Standard‑equipped with LS load‑sensing control; optional CT constant‑torque (constant‑power) control. Displacement ranges from 40‑150 cc/rev. Continuous rated pressure 310‑400 bar, peak intermittent pressure up to 420 bar. Only 125 mm overall width, direct flange‑mountable onto gearbox / engine PTO ports. Through‑drive shaft enables multi‑pump tandem configuration. FKM fluoro‑rubber seals fitted as standard. Widely used in construction machinery, sanitation vehicles, forestry equipment, military vehicles and agricultural mobile hydraulic systems. Balanced performance in energy‑saving, low noise, high durability and compact installation footprint.

Additional products and models are available under this brand. Please contact our sales staff for quotations.

2. Core Structure & Control Principles

Main Mechanical Construction

7‑piston swash‑plate variable‑displacement architecture with high‑wear valve‑plate and slipper friction pairs. High‑strength ductile cast iron housing, side‑mounted port layout. DUTRIE through‑drive version allows rear‑end tandem mounting of TXV, XPi and PA auxiliary pumps. One PTO input drives multiple hydraulic circuits and optimizes vehicle chassis layout space.

Reversible rotation design: TXV130 / TXV150 can switch clockwise / counter‑clockwise rotation simply by replacing set‑screws. Separate left‑hand / right‑hand stock is not required, lowering spare‑parts management costs.

Two Main Control Options

(1) Standard LS Load‑Sensing Control (Factory Default)

Real‑time load‑pressure signal acquisition. The pump automatically adjusts output flow to match actual load demand. Under idle conditions, displacement drops to minimum standby setting. It reduces engine load, heat generation and fuel consumption. Fast response with linear, shock‑free and jitter‑free actuation.

(2) Optional CT Constant‑Torque / Constant‑Power Control

Maintains constant torque as pressure × flow. Built‑in power‑limiting mechanism restricts maximum absorbed shaft torque and prevents engine stall under heavy‑load conditions. Torque adjustment range: 90‑700 Nm. Factory preset, fine‑tuning accessible on‑site via adjustment screws. Ideal for truck‑mounted cranes and heavy‑duty compactors.

3. Key Product Advantages

Ultra‑Compact On‑Board Design

Overall width only 125 mm. DIN ISO14 (DIN5462) flange standard for direct connection to vehicle PTO interfaces without adapter brackets, fitting confined truck chassis installation space.

Heavy‑Duty High‑Pressure Durability

Continuous operating pressure up to 400 bar, intermittent peak pressure 420 bar. Reinforced pistons, slippers and bearing assemblies withstand vehicle vibration, shock and 24‑hour heavy‑duty cycles. Standard FKM fluoro‑rubber seals resist extreme temperatures and hydraulic‑oil aging leakage.

Energy‑Saving & Extended System Service Life

LS load‑sensing low‑displacement standby mode delivers over 30 % fuel saving compared with fixed‑displacement pumps. Reduced system heat lowers radiator burden and extends service life of hydraulic oil and sealing components.

Flexible Modular Expansion

Through‑drive tandem design supports gear pumps and smaller piston pumps for combined multi‑pump assemblies. Optional accessories: maximum‑displacement limit screw, LS‑line filter adapter, high‑low pressure overflow regulation assembly.

Wide Speed Range for Mobile Applications

Full‑displacement allowable speed: 1900‑3000 rpm, matching diesel engine idle‑to‑rated speed range. Large‑size 1.5″BSP suction port minimizes cavitation risk under high‑speed operation.

Full Compliance Specifications

Conforms to EU mobile‑machinery safety standards. Compatible with mineral‑based hydraulic oils. Viscosity range: 10‑400 cSt. Working oil temperature: ‑20 ℃ ~ +80 ℃. Stable ambient operation up to 50 ℃.

4. Main Models & Basic Parameters

Standard TXV Series (DIN‑flange mainstream on‑board variants)

Full displacement lineup: TXV40, TXV60, TXV75, TXV92, TXV120, TXV130, TXV150

‑ TXV40 / TXV60: Small‑displacement. 40 / 60 cc/rev. For light‑duty sanitation trucks, compact truck‑mounted cranes and spreaders. Rated 310 bar, peak 350 bar. ‑ TXV75 / TXV92: General‑purpose mainstream. 75 / 92 cc/rev. For medium‑size refuse trucks, forestry cranes and snow‑removal vehicles. Rated 350 bar, peak 400 bar. ‑ TXV120 / TXV130: Medium‑large flow. 120 / 130 cc/rev. For heavy‑duty on‑board construction equipment. TXV130‑DUTRIE through‑drive version supports auxiliary pump tandem mounting. ‑ TXV150: Largest‑displacement on‑board variable pump in portfolio. 150 cc/rev. For heavy‑lift truck‑mounted cranes and mine service vehicles. Rated 400 bar, peak 420 bar.

TXVA Series (SAE‑C flange North‑American version)

TXVA75, TXVA92. SAE‑C 2‑hole / 4‑hole flange, splined or straight key shaft end. Adapted for North‑American truck chassis. Identical control logic as standard TXV range.

General Port Specifications

‑ Suction port: 1‑1/2″ BSP ‑ Drain port: 1/2″ BSP ‑ LS control port: G1/4″ BSP ‑ Shaft: DIN involute spline; TXVA adopts SAE J744 14‑tooth spline / straight‑key shaft ‑ Filtration requirement: System filter ≥20 μm. Oil cleanliness class ISO 4406 20/18/15 or superior.

5. Industry Application Scenarios

Sanitation Special‑Purpose Vehicles

Compactor refuse trucks, street sweepers, de‑icing spreaders, high‑pressure washer trucks. CT constant‑torque control prevents engine stall during heavy‑load lifting cycles.

Truck‑Mounted Lifting Equipment

Urban loader cranes, forestry cranes, aerial work platforms. LS load‑sensing delivers smooth, shock‑free lifting speed modulation.

Municipal & Construction Vehicles

Concrete mixers, road pavers, tipper lifting systems, compact mine service vehicles.

Agricultural & Forestry Machinery

Large harvesters, forest‑trimming equipment, hydraulic power units for farm tipper trucks.

Military Special‑Purpose Vehicles

Hydraulic systems for military transport trucks and emergency rescue vehicles, high‑reliability performance for narrow‑space installation.

6. Supply & Maintenance Notes

Standard LS load‑sensing TXV75 and TXV92 are normally available as original stock. TXV130 through‑drive units, high‑displacement TXV150, CT constant‑torque custom pumps and TXVA SAE‑flange variants are built‑to‑order imported from France.

Original spare parts are available separately for replacement: piston‑slipper assemblies, valve plate, seal repair kits, LS control‑valve assemblies, torque‑adjustment mechanisms and shaft spline hubs.

Additional products and models are available under this brand. Please contact our sales staff for quotations.